E-Tube® Wet Electrostatic Precipitator (WESP)

The control of fine particulate emissions is often one of the most difficult environmental control problems faced by industry. Sub-micron particles present a significant threat to human health and are one of the leading causes of visibility degradation. The Geoenergy® E-Tube® Wet Electrostatic Precipitator (Wet ESP, WESP) is a cost-effective way to control these emissions.

The control of fine particulate emissions is often one of the most difficult environmental control problems faced by industry. Sub-micron particles present a significant threat to human health and are one of the leading causes of visibility degradation. The Geoenergy® E-Tube® Wet Electrostatic Precipitator (Wet ESP, WESP) is a cost-effective way to control these emissions.

Geoenergy E-Tube Wet Electrostatic Precipitator

Wet ESP Basics

The wet ESP is a particulate matter control device that functions through gas residence time in an intense electric field to ionize/charge and capture particles and droplets on to a collection surface. The discharge electrode imparts a negative charge on the particles present in the gas stream as it flows through the collection section. The negatively charged particles are attracted to the grounded surface of the collection electrode. Wet ESPs have no barriers to gas flow, operate with low pressure drop, and are typically designed for 90 – 99% removal efficiency.

Wet ESP systems provide an efficient solution for the following air emission problems:

  • Particulate matter (PM)
  • Blue haze
  • Heavy metals (lead, arsenic, cadmium, zinc, chromium, copper)
  • Sulfuric acid mist (H2SO4, SO3, SAM)
  • Sticky, oily, or wet particulate
  • Tar
  • Condensable particulate matter
  • Submicron particulate matter
  • Particulate in a saturated/wet gas stream

Geoenergy E-Tube® Wet Electrostatic Precipitator (Wet ESP)

The E-Tube® Wet ESP system is a state of the art air pollution control device that has been used successfully for over 34 years for the removal of PM from multiple industrial applications.

Features

  • High-frequency transformer-rectifier sets to maximize the total electric field and reduce energy consumption
  • External tube cooling reduces water consumption and aids in keeping the collection tube walls cleaner
  • Our Star II electrode design’s unique shape improves efficiency and helps reduce the overall size and cost of the unit
  • Our Sphere adjustment hardware simplifies maintenance and electrode adjustment with its one bolt design

Common Applications

  • Incinerators (Hazardous Waste, Sewage Sludge)
  • Multiple Hearth Furnaces
  • Metallurgical Smelters and Roasters
  • Sulfuric Acid Plants, Sulfuric Acid Mist (SAM) Removal
  • Wood Dryers Including: Oriented Strand Board (OSB), Medium Density Fiber Board (MDF), Particle Board (PB), Industrial Wood Pellets
  • Panel Board Press Vents
  • Insulation Manufacturing (forming curing, spinning wool chamber, melter exhaust, gutter exhaust)
  • Industrial Boilers: multi-fuel fired, wood fired, hog fuel fired, tire derived fuel (TDF), fuel oil fired
  • Food Products including French Fry Plants
  • Tire Manufacturing
  • Blue Haze Abatement
  • Refinery FCCU
  • Oil Fields Sour Waste Gas Incineration
  • Tail Gas Cleaning
  • Clean-up Downstream of Wet Scrubbers

Geoenergy E-Tube® Wet Electrostatic Precipitator (Wet ESP)

The E-Tube® Wet ESP system is a state of the art air pollution control device that has been used successfully for over 34 years for the removal of PM from multiple industrial applications.

Features

  • High-frequency transformer-rectifier sets to maximize the total electric field and reduce energy consumption
  • External tube cooling reduces water consumption and aids in keeping the collection tube walls cleaner
  • Our Star II electrode design’s unique shape improves efficiency and helps reduce the overall size and cost of the unit
  • Our Sphere adjustment hardware simplifies maintenance and electrode adjustment with its one bolt design

Common Applications

  • Incinerators (Hazardous Waste, Sewage Sludge)
  • Multiple Hearth Furnaces
  • Metallurgical Smelters and Roasters
  • Sulfuric Acid Plants, Sulfuric Acid Mist (SAM) Removal
  • Wood Dryers Including: Oriented Strand Board (OSB), Medium Density Fiber Board (MDF), Particle Board (PB), Industrial Wood Pellets
  • Panel Board Press Vents
  • Insulation Manufacturing (forming curing, spinning wool chamber, melter exhaust, gutter exhaust)
  • Industrial Boilers: multi-fuel fired, wood fired, hog fuel fired, tire derived fuel (TDF), fuel oil fired
  • Food Products including French Fry Plants
  • Tire Manufacturing
  • Blue Haze Abatement
  • Refinery FCCU
  • Oil Fields Sour Waste Gas Incineration
  • Tail Gas Cleaning
  • Clean-up Downstream of Wet Scrubbers

To learn more about the E-Tube® Wet ESP

Or send a message below to get started

Dustex - Clean Air Technologies

Dustex is a global supplier of engineered systems that reduce air emissions and improve operational efficiencies. We are at the forefront of engineered solutions for clean air technologies with an exceptional and experienced staff. Our outstanding service combined with our wide breadth of technology allows us to provide practical and economical solutions for our customers that fit their unique needs.

 

Contact Details

Dustex - Clean Air Technologies

Corporate Office

60 Chastain Center Blvd NW, Ste 60
Kennesaw, GA 30144 USA

Send us a message

Dustex is a global supplier of engineered systems that reduce air emissions and improve operational efficiencies. We are at the forefront of engineered solutions for clean air technologies with an exceptional and experienced staff. Our outstanding service combined with our wide breadth of technology allows us to provide practical and economical solutions for our customers that fit their unique needs.

Contact Details

Corporate Office 
60 Chastain Center Blvd NW, Ste 60
Kennesaw, GA 30144 USA

info@dustex.com

770-429-5575

Send us a message

© 2018 Dustex - Clean Air Technologies. All Rights Reserved.

EPA regulations support or require NOx control installations to achieve the lowest emissions level possible. Two of the solutions for post-combustion control systems are Selective Non-Catalytic Reduction (SNCR) and Selective Catalytic Reduction (SCR).   Both are of the most cost-effective and fuel-efficient technologies used to reduce stationary source emissions. Utilizing our field experience and injection technology, Dustex offers complete SCR and SNCR NOx control systems for various plants. State-of-the-art design, simulation, and technology ensure advantages with results that will surpass your requirements and meet guarantees.

© 2018 Dustex - Clean Air Technologies. All Rights Reserved.