Cyclone & Multi-Clone

Cyclone Basics

Have you ever been on “the scrambler” at the amusement park? If your answer is “yes”, then you have experienced first hand the principles of a cyclone. By spinning around on the ride, the person on the outside gets squished by the person on the inside. Why? Because of centrifugal force. This is a form of artificial gravity. In fact, the faster the spin the more “gravitational force” or “g force” is created.

The Scrambler In a cyclone, a fluid, oftentimes a process gas, is caused to spin. This creates a “g force” on everything in the gas. This force causes particles and dust to be moved to the outside of “the ride”. Then when the gas is turned to exit the cyclone, the momentum of the particles allows them to be separated from the gas stream! Now you will never look at a cyclone the same.

The longer/taller the cyclone is, the longer the particle is “on the ride”. Therefore, the separation is more efficient. And as we said before, the faster the spin, the more quickly the particles move to the outside.

We design and manufacture five distinct cyclone collectors, to include:

  • The ST Series of high efficiency single tube cyclones
  • The PC Series of heavy duty primary pre-cleaner cyclones
  • The ST-10 Series of steel high efficiency multiple tube cyclones
  • The M-40A cast aluminum multi-clone cyclone
  • The Dustex series of cast iron multi-clone cyclones (as shown)

We design and manufacture five distinct cyclone collectors, to include:

  • The ST Series of high efficiency single tube cyclones
  • The PC Series of heavy duty primary pre-cleaner cyclones
  • The ST-10 Series of steel high efficiency multiple tube cyclones
  • The M-40A cast aluminum multi-clone cyclone
  • The Dustex series of cast iron multi-clone cyclones (as shown)

To learn more about our Cyclones

Or send us a message below to get started

Dustex - Clean Air Technologies

Dustex is a global supplier of engineered systems that reduce air emissions and improve operational efficiencies. We are at the forefront of engineered solutions for clean air technologies with an exceptional and experienced staff. Our outstanding service combined with our wide breadth of technology allows us to provide practical and economical solutions for our customers that fit their unique needs.

 

Contact Details

Dustex - Clean Air Technologies

Corporate Office

60 Chastain Center Blvd NW, Ste 60
Kennesaw, GA 30144 USA

Send us a message

Dustex is a global supplier of engineered systems that reduce air emissions and improve operational efficiencies. We are at the forefront of engineered solutions for clean air technologies with an exceptional and experienced staff. Our outstanding service combined with our wide breadth of technology allows us to provide practical and economical solutions for our customers that fit their unique needs.

Contact Details

Corporate Office 
60 Chastain Center Blvd NW, Ste 60
Kennesaw, GA 30144 USA

info@dustex.com

770-429-5575

Send us a message

© 2018 Dustex - Clean Air Technologies. All Rights Reserved.

EPA regulations support or require NOx control installations to achieve the lowest emissions level possible. Two of the solutions for post-combustion control systems are Selective Non-Catalytic Reduction (SNCR) and Selective Catalytic Reduction (SCR).   Both are of the most cost-effective and fuel-efficient technologies used to reduce stationary source emissions. Utilizing our field experience and injection technology, Dustex offers complete SCR and SNCR NOx control systems for various plants. State-of-the-art design, simulation, and technology ensure advantages with results that will surpass your requirements and meet guarantees.

© 2018 Dustex - Clean Air Technologies. All Rights Reserved.